Expert Answers about Toyota FJ Cruiser

• Will the Thule Helium Aero Trailer Hitch Mount Bike Rack Fit a 2011 Toyota FJ Cruiser
• To determine if the Thule Helium Aero # TH9042PRO will fit your 2011 FJ Cruiser, you will need to take an important measurement. Measure from the center of the trailer hitch pin hole straight back to the distance required to clear the spare tire. If this distance is less than 8 inches then the bike rack will fit. I do have another option. The Thule Spare Me, # TH963PRO, is listed as a fit for your 2011 Toyota FJ Cruiser. I have included a link to a video review of the rack for you. The...
  view full answer...


• Will the Thule Pulse XL Cargo Box Fit on a 2011 Toyota FJ Cruiser with Factory Roof Rack
• The Thule Pulse XL Cargo Box, # TH615, has been confirmed to fit the factory roof rack on your 2011 Toyota FJ Cruiser. This cargo box has 16 cubic feet of space and measures 76 inches long x 33 inches wide x 16-1/2 inches tall. You may also be interested in a tire step like the HitchMate TireStep, # HE4040. I recently used this step to install a cargo box on a large SUV and it saved a lot of time and hassle for the installation. It is also makes loading and unloading cargo into the cargo...
  view full answer...


• Pewag Tire Chains that Fit Tire Size LT285/70R17
• Yes the Pewag Tire Chains part # PWE3229SC that you referenced are a confirmed fit for the tire size 285/70R17 that you have on your FJ Cruiser.
  view full answer...


• Correct Curt 4-Pole Trailer Wiring Harness for a 2008 Toyota FJ Cruiser
• The correct Curt T-Connector Vehicle Wiring Harness for a 2008 Toyota FJ Cruiser is part # C55567, there are no other types of trailer wiring harness options for this vehicle such as ones that plug into a single port. I confirmed this with Curt for you.
  view full answer...


• Which Bike Rack Will Fit L Trek Farley Fat Bike With 5 Wide Tires?
• The Yakima Single Speed # Y02481 will work great for your L Trek Farley fat bike. This bike rack allows up to 5" wide tires and up to 29" tall wheels, so you will not have to worry about fitment issues. The Yakima Single Speed comes with very long wheel straps in order to wrap around very wide tires on fat bikes. I have attached a demonstration video for this bike rack.
  view full answer...


• Can the Yakima Kayak Carrier # Y04083-04082 Fit on My Factory Rack on My 2012 Toyota FJ Cruiser?
• We definitely have a way to confirm whether your round bars on your 2012 Toyota FJ Cruiser work with the Yakima Kayak Carrier # Y04083-04082. As long as the round bars on your rack are at least 1-1/8 inches in diameter, the # Y04083-04082 can clamp onto those bars. I recommend measuring the diameter of your bars to make sure they fit into this thickness requirement.
  view full answer...


• Will Front Mount Trailer Hitch, # 31367, Fit a 2008 Toyota FJ Cruiser with Trail Team Package
• I spoke with my contact at Curt on whether or not the Front Mount Trailer Hitch Receiver, # 31367, can be installed on your 2008 Toyota FJ Cruiser with the grille guard in place. While he did not have any notes stated that it would not fit the Trail Team package models, he could not say for sure that it would fit. I have included a link to the instructions below. Take a look at the mounting points for the hitch and then where the grille guard is mounted on your FJ Cruiser. If they use...
  view full answer...


• Will etrailer Trailer Hitch Mount Cargo Carrier Allow Rear Door to Open on 2013 Toyota FJ Cruiser
• The etrailer trailer hitch mount cargo carrier # e98874 measures approximately 9-1/2 inches from the top of the receiver tube to the top of the side rails nearest the vehicle at 19-1/2 inches back from the center of the pin hole. This can vary slightly though if the hitch receiver is angled slightly up or down. Based on this it would be very close on a 2013 FJ Cruiser but you would need to measure to be sure. Also, when folded up, the carrier is 9 inches from the center of the hitch pin...
  view full answer...


• How Can I Tell If The Hollywood Racks Sport Rider SE Bike Rack Will Work With My Spare Tire?
• In order to determine if the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY84FR will clear the spare tire on your 2007 Toyota FJ Cruiser, you are going to need to measure the distance from your receiver to the edge of your spare tire. If you have at least 7" of room, then you'll be good to go. If not, you're going to need a hitch adapter # HE06, which will provide another 7-3/8" of additional distance. Attached are a couple of videos for you to check out as well.
  view full answer...


• What Feet Are Required To Install Thule Square Bars Onto Roof Of 2007 Toyota FJ Cruiser?
• Since your Thule crossbars have the channel underneath, they will be compatible with the Evo Raised Rail Feet # TH710401 that fit your 2007 Toyota FJ Cruiser with the factory roof rack. Thule recommends using 53" square bars # TH712400 so make sure your current bars are 53" otherwise it may not fit since the track underneath has a specific length. If your square bars are a different length then you will need to lay them across your roof and verify that the track underneath meets the side...
  view full answer...


• Can Chains be Connected to Curt Hitch Extender
• There is not a place for safety chains to connect to the 18" Curt Extender for 2" Receivers # C45796 so you would need to get new safety chains as well; I have added a link to our selection of safety chains for you to check out such as the 60" # C19749. Keep in mind you will need Pin and Clip # C21510 in order to attach the extender to your current hitch, and that an extender is going to reduce the capacity of your current trailer hitch by 50 percent.
  view full answer...


• Installing Tekonsha PRIMUS IQ Electronic Brake Controller # TK90160 On My 2008 Toyota FJ Cruiser
• Yes, the Tekonsha PRIMUS IQ Electronic Brake Controller, part # TK90160, will work on your 2008 Toyota FJ Cruiser to activate the electric brakes on your trailer. Brake controllers are not vehicle specific and can be wired into any vehicle. If you have a 4 to 7-Way adapter such as part # 30717, with extra wires to be connected and not an adapter, you will just need to connect the remaining wires, including the Blue wire. We do have a brake controller installation kit, part # ETBC7 that...
  view full answer...


• Will the Thule Roof Mount Cargo Basket Fit a 2007 Toyota FJ Cruiser with Factory Roof Rack
• In order to determine if the Thule Canyon XT cargo basket, # TH859XT, will fit the 2007 Toyota FJ Cruiser, you will need to measure the distance between the crossbars. from the center of the front bar to the center of the rear bar. For the rack to fit, they just need to be between 20 inches and 37 inches apart. I have included a link to a video review of the basket for you.
  view full answer...


• Will the Curt Front Hitch for a 2010 Toyota FJ Cruiser Fit with Aftermarket Bumper
• In order to confirm fit of the Curt Front Mount Trailer Hitch Receiver part # 31367 on a 2010 Toyota FJ Cruiser with aftermarket front bumper you'll need to review the installation instructions (attached) and ensure the mounting locations of the trailer hitch do not interfere with the bumper. The trailer hitch manufactures don't do testing on aftermarket parts unfortunately. The hitch weighs around 35 lbs.
  view full answer...


• Will CIPA Universal Clip-On Towing Mirror Fit my Toyota FJ Cruiser
• CIPA Universal Clip-On Towing Mirror, part # 7070, is a universal fit item and should fit most mirrors including your Toyota FJ Cruiser. This mirror will fit your vehicles mirrors as long as there is a lip or space between the glass edge of mirror and mirror housing for the clip to attach to. I have linked a video review of the CIPA Universal Strap-On Towing Mirror, part # 7070
  view full answer...


• Replacement Brackets and Hardware for a Westin Grille Guard for a 2007 Toyota FJ Cruiser
• The replacement bracket and hardware kit # 40-221PK is indeed correct for the Westin grille guards that the fit the 2007 Toyota FJ Cruiser # 40-2215. This is the new style that has a double bar at the top, center of the grille guard.
  view full answer...


• Will Thule Camber 2 Bike Rack TH9058 Work With Curt 8" Hitch Extender C45791?
• The hitch pin holes in the Curt Hitch Extender for 2" Hitch Receivers - 8" Long # C45791 you were looking at are 5/8" and are not threaded. The M12x1.75 Anti-Rattle Bolt included with your Thule Camber 2 Bike Rack - 1-1/4" and 2" Hitches - Tilting - Steel # TH9058 will fit through the 5/8" hole and threads into the bike rack itself so the extender does not need to be threaded. This combination will work perfectly together and give you the additional clearance you are looking for. Keep...
  view full answer...


• Spare Tire Bike Rack For 2010 Toyota FJ Cruiser
• Yes, The Hollywood Racks SR1 2-Bike Carrier part # HRSR1 fits spare tires up to 15" wide so your LT265 75/16 tires on the 2010 Toyota FJ Cruiser will work fine. The bike rack itself will not damage the rear view camera but it will be partially blocked by the bikes. If you will be carrying bikes with a slanted cross tube like a women's or children's bike I recommend a bike frame adapter bar part # 64005. This adapter bar will give the bike a horizontal cross tube to hang the bike from.
  view full answer...


• Will Firestone Coil-Rite Air Helper Springs Work On 2009 Toyota FJ Cruiser With 3-Inch Lift
• I called my contact at Firestone about your 2009 FJ Cruiser with the three-inch lift. They told me if you have changed out the factory springs to a different spring that has a different diameter then they will need the inside diameter of the spring with the vehicle weight on the springs. This will tell them what size bag should be ordered with the # F4135 Ride-Rite kit. If you did not change out the coil springs then the # F4135 kit will work for your vehicle.
  view full answer...


• Derale Engine Oil Cooler for 2012 Toyota FJ Cruiser 4x4
• Yes, you can use Derale Oil Cooler kit # D15602 in your FJ Cruiser. A supplementary oil cooler like the Derale # D15602 is a great way to keep your engine oil temperature in the ideal 180 to 200-degree Fahrenheit range. This Class III cooler kit includes a sandwich adapter and a range of sleeve nuts to ensure a proper match to the threads on your oil filter landing (where your oil filter currently mounts). The best place to mount the cooler core is in front of your AC condenser where...
  view full answer...